Stalingrad Gold Don Bridges

[Gordons HQ]

That's because you didn't read the manual.

Page 52:

It is possible for Engineer units to attempt to damage a Full-Hex Bridge, but it involves a multi-step process:

1. In Travel Mode, the Engineer unit must first move onto the bridge.
2. In the next turn, the Engineer unit can use the Bridge Operations command to begin wiring the bridge for demolition.
3. When the Bridge Operations complete, the bridge is shown as WIRED in the Terrain Info Box indicating that it is wired for demolition.
4. At this point the Engineer unit can move off the bridge and occupy an adjacent hex. The Engineer unit should also change into Deployed Mode at this point.
5. At any subsequent turn, the Engineer can attempt to blow the bridge by using the Damage Bridge or AT Ditch command.

The program will determine the success or failure of this attempt using the standard bridge damage procedure and using the Heavy Bridge defense parameter value.
Once a Full-Hex Bridge has been damaged, it cannot be repaired.

Thanks Cheerfully Insane,

I've been playing these games a long time and it was years ago when I read the manual.
I'm too old now to remember half of it, or even where I put my printed version of it.
I really don't like reading the manual from the computer as it makes the old eyes tired after a while.
Thanks for the explanation though as it all makes perfect sense now.
That is apart from the fact when right clicking from the adjacent hex where the engineer is, at the moment it does not show a bridge as adjacent to the engineer unit. I am hoping that if I carry out the what you describe when the engineer moves off the bridge and goes back to deployed mode then this will change and the engineer will be able to attempt to blow it ?

Cheers,

Gordon